Oil Pipette/Applicator w Squeeze Bottle and Screw Cap
Sewing machine oil pipettes are used for the application of oil during sewing machine maintenance. It is important to eliminate the friction between contacting moving parts in order to reduce abnormal wear and tear/erosion and extend the lifespan of the machine in general. A users manual should always be consulted when applying oil. This pipette consists of a squeeze bottle and steel spout/applicator with a screw cap to prevent leakage from the tip. The overall length of the pipette is approximately 20cm while the diameter of the bottle is approximately 4.5cm. The length of the spout is approximately 9cm with an spout hole diameter of approximately 1mm. The bottle can hold up to 120ml of oil. Sold as an individual pipette.
Product Measurements
Length: 20cm | Spout Length: 9cm | Bottle Diameter: 4.5cm | Spout hole diameter: 1mm | Sold Per: Individual Pipette
If other colours are available for this product, these are listed in the table below. Please note colour variations may occur especially on naturally occurring products and those that have been dyed. We try our best to ensure colour consistency but cannot guarantee that two different products with the same colour description will have the same colour.
