Glue E6000 - Spray Adhesive
From
$25.00
The E600 Spray adhesive is a permanent, multi-purpose latex-based spray without the toxic smells or fumes. It is strong, flexible, water-resistant, resists bleed-through and yellowing. This spray adhesive is ideal for many materials including fabrics, metal, vinyl, Styrofoam, felt, plastic, leather, paper & more!
IMPORTANT - Clean after each use. To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. Sold per bottle. 118.2ml/4oz
Directions of Use:
1. Read all directions on bottle before beginning.
2. Shake bottle vigorously before each use.
3. Protect the surrounding area from any overspray
4. Hold bottle 20-30cm away from surface
For Porous Materials (Including Foams & Styrofoam)
1. Spray a heavy coat to both surfaces to be joined. Attach surfaces together and allow to dry. Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure
For Non-Porous Materials.
1. Spray a light coat to one surface. Attach surfaces together and allow to dry. Maximum strength may not be reached for 1-5 hours.
For Paper, Photos, Cardboard & Foil
1. Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry for 1-3 minutes
Product Measurements
4oz/118.2ml | Price per bottle
If other colours are available for this product, these are listed in the table below. Please note colour variations may occur especially on naturally occurring products and those that have been dyed. We try our best to ensure colour consistency but cannot guarantee that two different products with the same colour description will have the same colour.
