WE DELIVER ORDERS WORLD-WIDE Contact Us 1800 2 ADORN
Need Help?
  • Please complete this form & we will be in touch shortly.

Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (Price per Sheet)

Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (Price per Sheet)
From: $7.90
Add to Wishlist
Have a Question?
Description

Elasta-Plastic is a stretchable perforated thermoplastic unlike any other available on our website. It is also known as "Plastic Fantastic". When stretched, the perforations present form a unique pattern of holes, allowing for the creation of some truly imaginative designs. It is great as an overlay for masks, costumes, millinery, castings & hand molded sculptural pieces, particularly when another colour is placed underneath. When heated it becomes soft, allowing it to be molded and shaped by hand or on a mold or block. Once cooled it retains the molded shape. This process of heating and cooling can be repeated until the desired shape is acquired. One of the incredicble features about this thermoplastic is the fact that it has shape memory - meaning that even if it stretched, if re-activated in water, it will essentialy shrink back to it's original shape!. Heating is done via water immersion (heat guns should only be used for touching up). The activation temperature of this product is around 70-75°C. This product is available in a host of vibrant colours and is sold in squares of 7.5 x 7.5cm and 15 x 15cm.


>> Please see the DETAILS TAB for full details and instructions on how to use this product. <<

Product Measurements

Sheet Dimensions: 7.5 x 7.5cm or 15 x 15cm | Thickness: Approximately 3.2mm | Sold per: Individual sheet
Details

Elasta-Plastic is a unique molding material which initially resembles stiff perforated plastic sheeting. It is great for masks, costumes, millinery, castings & hand molded sculptural pieces. When heated it becomes soft, allowing it to be streched, molded and shaped by hand or on a mold or block. Once cooled it retains the molded shape. This process of heating and cooling can be repeated until the desired shape is acquired. If re-activated and allowed to be suspended in water, it will return to its original unstretched shape. Please note that the ACTIVATION TEMPERATURE for Elasta-Plastic is 70-75°C. 


BLOCKING/MOLDING:
Elasta-Plastic makes for an excellent overlay for alternate colours as the perforations allow for exposure of the layer underneath. The surface is capable of stretching, molding like putty once it has been heated but will snap under too much tension (see below for heating instructions). If snapped, the affected area may not be able to be repaired. This product contains a surface layer which prevents self-adhesion. Hence it will not stick easily to itself unless this layer is removed. This can be done via scraping or by brushing with acetone and then heating the selected area to activate it. For sticking thermoplastics, we also recommend external adhesives such as UHU glue. 


HEATING: 
Heating is recommended using boiled water which has been cooled slightly. Dry heating can be used with a heat gun but may not give a consistent activation throughout the product. If using an oven, care must be taken not to overheat as this material will absorb heat easier this way. If placed in water, and activated, the stretched form of this product will attempt revert to it's old shape (including the size of the perforations) but will never be 100% the same as it originally was. To heat, place a sheet in a bowl or container of near-boiling water for around 1-2 minutes until soft (The white version of this plastic becomes transparent. Coloured variants vary but may become slightly transparent to some degree). Once soft, it can be stretched over a block or desired molding shape. The size of the holes will increase with stretch. Elasta-Plastic should remain moldable for approimately 4 minutes after activation.


PLEASE NOTE: When heated, Elasta-Plastic should not be applied directly to bare skin as burns may occur. 

Product Colours

If other colours are available for this product, these are listed in the table below. Please note colour variations may occur especially on naturally occurring products and those that have been dyed. We try our best to ensure colour consistency but cannot guarantee that two different products with the same colour description will have the same colour.
Preview
SKU
Product Title
Unit Price
Final Price
Qty
SKU:AP-06126-150-BLA
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (15 x 15cm) - Black
Unit Price:$27.90
Final Price:$0.00
Sold Out
SKU:AP-06126-75-BLA
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (7.5 x 7.5cm) - Black
Unit Price:$7.90
Final Price:$0.00
Sold Out
SKU:AP-06126-150-CBL
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (15 x 15cm) - Cobalt Blue
Unit Price:$27.90
Final Price:$0.00
Sold Out
SKU:AP-06126-75-CBL
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (7.5 x 7.5cm) - Cobalt Blue
Unit Price:$7.90
Final Price:$0.00
SKU:AP-06126-75-SGY
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (7.5 x 7.5cm) - Silver Grey
Unit Price:$7.90
Final Price:$0.00
Sold Out
SKU:AP-06126-150-VPK
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (15 x 15cm) - Vivid Pink
Unit Price:$27.90
Final Price:$0.00
Sold Out
SKU:AP-06126-75-VPK
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (7.5 x 7.5cm) - Vivid Pink
Unit Price:$7.90
Final Price:$0.00
SKU:AP-06126-150-RED
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (15 x 15cm) - Red
Unit Price:$27.90
Final Price:$0.00
Sold Out
SKU:AP-06126-75-RED
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (7.5 x 7.5cm) - Red
Unit Price:$7.90
Final Price:$0.00
SKU:AP-06126-150-WHI
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (15 x 15cm) - White
Unit Price:$27.90
Final Price:$0.00
SKU:AP-06126-75-WHI
Name:Thermoplastic - Elasta-Plastic Stretchable Perforated Molding Material (7.5 x 7.5cm) - White
Unit Price:$7.90
Final Price:$0.00
Is a Product Sold Out? Click Here